APPLICATION:
Air-cooled Weather Conditions Meter. To determine the color fastness and aging to sunlight, weather resistance, compound color fastness to sunlight-perspiration of colored textile, leather, leatheroid, plastic, etc, by setting various parameters of irradiance, temperature, humidity, spray to simulate natural condition in lab. Be able to control irradiance real-time, automatically inspect and compensate irradiance, temperature, humidity.
RELATED STANDARDS:
|
STANDARDS |
ISO 105-B02, B04, B06 |
Note: this tester can conform to but not limit to all the standards above, for more standards conformance, please contact us.
FEATURES:
l Presetting various specifications, meet diverse range of standards, including ISO, etc.
l Light source:1500 watt air cooled xenon arc lamp;
l Blue LCD Panel, the operator simply selects the required test module and test standard; easy to use.
l Rotate model: revolution, rotation.
l Irradiation control, 24 steps adjustable, manual control;
l Manageable size is most appropriate to testing fabric samples, and easy access to sample holder;
l Ultrasonic humidification system makes spray water even and low noise;
l Chamber temperature control, irradiation temperature, heater raise the temperature;
KEY SPECIFICATION:
l Power supply Ac220V±5% 50Hz 20A 2500W
l Irradiation Source: 1500W Air-cooled Long Xenon Arc Lamp
l Average Lamp Life: 1000 hours
l Rack Rotating Speed: 5r/min
l Diameter of Sample Rack 350mm
l Specimen Holder Exposure Area: 100×45mm(ISO)
l Max Exposure Area of Specimen 450
l BST 30℃~110℃±1℃
l BPT 40℃~80℃±2℃
l Humidity Range 15％RH~95％±5%RH
l Irradiance range 290nm~800nm
l Instrument Dimension 850×620×1750mm(L×W×H)
l Instrument Weight 180kg
ENVIRONMENTAL REQUIREMENTS (AMBIENT):
Temperature Range: 16-29℃ (60- 85℉)
Humidity Range: 0-85% RH, non-condensing.
Altitude: Up to 2000 meters (6560 feet)
Storage: 10-43℃ (50-110℉), 20-80% RH
Installation Category: II
Pollution Degree: 2
The room should be ventilated properly with minimal drafts, air pollution, or dust. Do not install the instrument in a corrosion testing environment, or adjacent to corrosion testing equipment it is not advisable to install the instrument in such locations as a warehouse, boiler room, garage/factory are, paint room, or where doors to the outside environment are frequently opened causing changes in room temperature and humidity. Such locations may adversely affect instrument operation, longevity and test integrity (repeatability).
RELATED KEY WORDS:
colour fastness to washing,colour measurement instrument,colourfastness to hot pressing heating,colourfastness to perspiration,colourfastness to rubbing,colourfastness to washing,Comb sorters,compatibility testing,Compressing strength,compression strength,compression test equipment,compression test machine,compression tester,compression testing,compression testing machine |
